• Sturdy Graphite Main Frame Unit
• Simple Construction
• CNC Aluminum Bearing Blocks
• CNC Delrin Machined Main Gear w/Autorotation
• True T6-6061 Aluminum Components
• Quality Bearings Used Throughout
• CNC Aluminum Tail Drive Pulleys
• Elevated Battery C.G. (Center of Gravity)
• Hardened Main Shaft (10mm Hollow)
• Direct Controlled 120° CCPM
• Aluminum Boom Clamps
• Motor Supported by Aluminum Mount
• Motor Shaft Lower Bearing Support
• 109 Tooth x 12mm Main Gear
• Optional Pinion Gear Available (10-15 Tooth)
• o Removable Battery Tray

• Full Ball Bearings/Thrust Bearings
• Heavy Duty Hiller Rods
• 8mm Head Axle
• CNC Machined Aluminum Swashplate
• Hex/Hardened Control Balls
• CNC Aluminum Head Button
• CNC Aluminum Blade Grips
• High Quality Swashplate Heim Ball/Ball Bearing
• Simple Sleek Design
• 1-Piece Dampers Tail Rotor •
•  Full Ball Bearings
• Graphite Tail Fin
•  Secure CNC Aluminum Tail Rotor Clamps
• 22mm Lightweight Aluminum Tail Boom
• Positive Control System
• 2mm Control Rod
• Hardened Tail Rotor Output Shaft
• Carbon/Aluminum Boom Supports

• High Visibility Painted Epoxy-Glass Canopy by CanoMOD™

• Recommended Motor KV Range: 850-900
• Gear Ratio: 8.38:1 (13t pinion gear/109t main gear)
• Battery Size: 6S 5000mah
• Main Rotor RPM: 2100-2300
• Motor Shaft Size: 6mm x 30/32mm

• Recommended Motor KV Range: 540-560
• Gear Ratio: 9.08:1 (12t pinion gear/109t main gear)
• Battery Size: 2 x 5S 4000-5000mah
• Main Rotor RPM: 2200-2400
• Motor Shaft Size: 6mm x 30/32mm

Helicopter
Heli Length	47.37" - 1203mm
Heli Height	15.125" - 384mm
Rotor Span	1365-1405mm - 600-620mm Blades
Tail Rotor Span	260mm - 95mm Blades
Avg. Ready-to-Fly Weight	6lbs-6.3lbs - 2.7-2.9kg (less Batteries)
Avg. Kit contents Weight	3.75lbs - 1.7kg (includes painted canopy)
Main Drive Ratio	6S - 8.38:1
Tail Drive Ratio	4.15:1
Bearings	4 Thrust Bearings, 1 German Heim Ball, 1 Torrington One-way Clutch Bearings, 33 Ball Bearings
10S	9.08:1

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: